NITTO X Crust M-30 Rack

Remember the Crust Small Rack? Probably not. If you do, this is a leveled up version of it made by the craftspeople at NITTO. This rack is our design and is optimized to be used with our framesets. The M-30 comes with a set of struts bent specifically so you can bolt this up to one of our forks that use our "Crust Crown" (the one in the photos up there that can be found on bikes like the Evasion and Bombora) without having to trim struts or adjust a diving board or anything like that. The platform will sit nice and level and be ready to hold onto whatever you may want to strap to it or rest on it.

This rack will probably work on other forks that have rack mounts about 140-ish mm from the hole in your fork crown as well, but no guarantee.

Details:

Made in Japan using Chromoly Tubing

Fillet Braze Construction

Color- Silver

Platform Size= Depth (Front to Back)= 213mm x Width= 200mm | Tongue Height= 105mm | Fork Crown Mount Length= 45mm (Threaded Section)/ 95mm (Total)

Strut Length- Short Struts= 125mm with 60mm of Usable Adjustment | Long Struts= 270mm with 150mm of Usable Adjustment

Load Capacity- 15lbs (6.8kg)

Weight (with Uncut Struts and Hardware)- 432g